Memmert WNB 29 Waterbath
- 29L Waterbath, Basic control, 115v
- State-of-the-art control technology
- Optional water level control
- Temperature range up to +95 °C (with Peltier cooling unit CDP115 from +10 °C)
The combination of corrosion-resistant stainless steel, precise electronics and multiple temperature protection guarantees the highest level of safety in the laboratory.
Memmert waterbaths and oilbaths that is the combination of high-grade anti-corrosion stainless steel with the latest electronics, for maximum functional security and decisive advantages in convenience and ease of operation. With a setpoint resolution of 0.1 K, indicated temperature to the nearest 0.1 K, and timer programming of switch-on delay and hold time in 1-minute steps, the accuracy of Memmert thermostatic baths is carried to a new dimension.
Unique heating concept for optimal temperature distribution
The superior heating concept of the Memmert ovens can also be found in the water bath. Protected from water, but still close to the load, the heating lies under deep-drawn and easy to clean ribs. The heating elements can therefore neither corrode nor become furred. Through their positioning in the floor and side walls, a natural mixing of the temperature control fluid arises, providing better temperature distribution in the water bath.
Energy-efficient and precise waterbath cooling appliance
Space-saving and user-friendly the cooling device CDP 115 puts an end to unwieldy external cooling appliances. It can be accommodated easily on all Memmert waterbath models and allows work to be performed with temperatures below room temperature down to 10°C with a precision of ±0.1 Kelvin.
In The Box
- Gable Cover included standard
Manuals/Guides
Manufacturer Specs
| Memmert WNB 29 Specifications | |
| Temperature | |
| Temperature range in °C | min. 5°C above ambient up to +95°C with additional boiling mode (+100°C) |
| Control of standard components | |
| Temperature | 1 Pt100 sensor class A in 4-wire-circuit |
| Timer | integrated digital timer from 1 min. to 99,59 hours for: ON continuous operation WAIT (delayed on for continuous and limited timed operation) HOLD |
| Safety | |
| Temperature control | mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath |
| Temperature control | in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value) |
| Autodiagnostic system | microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator |
| Heating concept | |
| Heating Baths | corrosion-proof large-area heating on three sides |
| Standard equipment | |
| Controller | digital display (LED) of set and actual temperature (0,1°C resolution) and of (remaining) programme time |
| Stainless steel interior | |
| Dimensions W x H x D in mm | w(A) x h(C) x d(B): 590 x 140 x 350 mm |
| Interior | easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded |
| Volume | 29 l |
| Liquid level min. | (H) 105 mm |
| Liquid level max. | (I) 120 mm |
| Textured stainless steel casing | |
| Dimensions | w(D) x h(G) x d(E): 818 x 343 x 516 mm |
| Electrical data | |
| Voltage | 230 V, 50/60 Hz |
| Electrical load | approx. 2400 W (during heating) |
| Ambient conditions | |
| Installation | The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm. |
| Ambient temperature | +5 °C to +40 °C |
| Humidity rh | max. 80 %, non-condensing |
| Overvoltage category | II |
| Pollution degree | 2 |
| Packing/shipping data | |
| Dimensions approx incl. carton | w x h x d: 910 x 610 x 400 cm |
| Net weight | approx. 24 kg |
| Gross weight carton | approx. 31 kg |
Tech Specs
Water Baths Recirculating Heating Chillers Coolers |
|
|---|---|
| Heating Capacity (Baths) | 2400 Watts |
| Max Temp (Chillers/Baths) | 95 C |
| Min Temp (Chillers/Baths) | 5 C |
| Reservoir Capacity (Baths) | 29 L |
Test Equipment General Attributes |
|
| Warranty | 3 YEARS |
| Warranty Details | 3 years guarantee worldwide |
| Product Weight | 24 KILOS (52.91 LBS) |
| Product Height | 22.00 IN |
| Product Length | 36.00 IN |
| Product Width | 24.00 IN |
| Shipping Weight | 31 KILOS (68.34 LBS) |
| ECCN Number | EAR99 |
| Country of Origin | Germany |
| Shipping Height | 22.00 IN |
| Shipping Length | 36.00 IN |
| Shipping Width | 24.00 IN |